Beurer FT 13 Thermometer White has an extra-flexible measuring tip that helps get fast and accurate readings. It uses contact-measurement technology and has no mercury. It has a flexible tip and is also water-resistant
Uses: The thermometer is used to measure the body temperature and convert the reading into a readable format such as Celsius and Fahrenheit
Product Specifications and Features:
Measurement range: 35.5C - 42.0C / 95F - 109F
Unit of measurement: °C and °F
Error: +/- 0.1C
Measuring time: 30 seconds approximately
Accuracy: Highly accurate
Waterproof: Yes
Memory: Displays the last measured value
Automatic switch-off: Yes
Sound alert: Acoustic signal when the measurement is complete
Fever alarm: Warning tone alerts if 37.8 °C is reached
Battery: One 1.5V LR41 battery
Contents: Digital thermometer, Protective cap
Good to Know:Dual mode reading (°F and °C )
Type of Thermometer: Non-mercury-based digital thermometer
Directions for Use:
Clean the tip with cold water and soap, then rinse it
Turn the thermometer on
Put the tip under your tongue, towards the back of your mouth
Close your lips around the thermometer
Wait until it beeps or flashes
Check the temperature on the display
Safety Information:
Read the label carefully before use
Keep the thermometer away from direct contact with sunlight
Thermometer should be washed before and after each use, preferably with an antiseptic solution
Do not wash the thermometer with hot water
Handle the thermometer with care
Frequently Asked Questions:
How do you know if the thermometer is broken? Insert your thermometer into the glass of cold water without touching the sides of the glass. After 30 seconds, your thermometer should read 32° F. If it does not, it may need to be replaced or recalibrated
How do you clean a thermometer? Use a cotton swab dipped in alcohol to clean the inside of any small crevices. Allow the alcohol to air-dry on the thermometer to kill germs effectively
What can affect a thermometer reading? Direct sunlight, cold temperatures or a sweaty forehead can affect temperature readings. Variations in user technique, such as holding the scanner too far away from the forehead, also may affect accuracy
