Copp Clean

Copp Clean Disinfectant and Cleaner is a broad-spectrum disinfectant formulated for surface and environmental cleaning in healthcare and high-risk facilities. Developed in India, it combines didecyl dimethyl ammonium chloride and copper(II) nitrate trihydrate, working effectively against bacteria, fungi, viruses, protozoa, and biofilms.

Key Ingredients:

• Didecyl Dimethyl Ammonium Chloride 4.96%

• Copper(II) Nitrate Trihydrate 0.40%

• Other/Inert Ingredients 94.64%

Key Benefits:

• Broad-Spectrum Efficacy: Effective against gram-negative and gram-positive bacteria, fungi, enveloped and non-enveloped viruses, protozoa, biofilms, and bacterial spores.

• Healthcare Application: Suitable for hospitals, ICUs, OTs, pharmaceutical clean rooms, and laboratories.

• Flexible Usage: Can be used for surface cleaning, mopping, and fogging at specified dilutions.

• Surface Compatibility: Safe for use on ceramic, porcelain, enamelled, plastic, stainless steel, brass, and other hard nonporous surfaces.

Concerns It Can Help With:

• Surface disinfection in hospitals and clinics

• Cleaning of ICUs, OTs, and critical care areas

• Disinfection in pharmaceutical and laboratory facilities

• Environmental hygiene in high-risk areas

Net Quantity:

• 1 L

Product Form:

• Liquid

Directions for Use:
Preparation of disinfectant solution:

• 1. High-risk and semi-critical areas like OTs, ICUs, radiology, oncology labs and morgue: Add 13.50 ml of Coppclean concentrate to 1 litre of tap water (1:75) for mopping floors, walls, furniture and equipment.

• 2. Non-critical areas like corridors, waiting rooms and reception area: Add 8 ml of Coppclean concentrate to 1 litre of tap water (1:125) for mopping floors, walls, furniture and equipment.

• 3. Fogging: Add 13.50 ml of HPO8 concentrate to 1 litre of tap water (1:75) for every 1000 cu. ft. in high-risk critical areas like operating theatres. These areas would be ready to use within one hour of fogging.

• Method of Application: Apply the use-solution to hard, non-porous surfaces, thoroughly wetting surfaces with a mop, sponge, cloth or sprayer. Treated surfaces must remain wet for 10 minutes. Wipe dry using a cloth, mop or sponge or allow to air dry.

Safety Information:

• Read the label carefully before use.

• If swallowed – Please visit a hospital.

• If in eyes – Please rinse eyes along with contact lens for 2 minutes, then remove the contact lens and rinse for 2-3 minutes.

• If on skin – Rinse the affected area for 2-3 minutes.

• For external use only.

• Store in original container in areas inaccessible to children.

• Avoid storage in extreme temperature or in sunlight.

• Do not reuse the container. Wrap empty container and put in trash.