Dr Morepen Gluco One BG 03 Blood Glucose Test Strip (Only Strips) | Diabetes Monitoring Devices

Dr Morepen Gluco One BG 03 Blood Glucose Test Strip (Only Strips)

Uses:

• Used with a glucometer to measure blood glucose levels

Product Specifications And Features:

• Product Dimensions: 3.7 x 3.6 x 6.4 cm; 26 gm

• Content: Test strips, no glucometer device, strips in a box intended for single, one-time use

• Minimum blood sample needed: 0.5 microlitres

• Provides information on how the program affects the blood glucose level

• It helps to test blood glucose frequently, which in turn allows for keeping blood sugar levels in control

• Requires only a tiny drop of blood for the test

• It helps monitor glucose levels at any time and anywhere

• It can be used to keep a regular tab on the sugar levels at home

Product Dimensions:
3.7 x 3.6 x 6.4 cm

Good To Know:

• For in-vitro diagnostic use, only

• Store in a capped vial in a cool and dry space between 4-30 degrees Celsius

• Discard any remaining test strips three months after the first opening of the vial

• Do not make any medical decisions without consulting a doctor

• Always discuss the results with a registered medical practitioner

• It is wise to check the test strips before use carefully for better results

• Always check the expiry date on the test strips and lancets before buying. This is because the use of outdated strips can give incorrect readings and thus, serve no purpose

• Do wash your hands thoroughly with an antiseptic hand wash before the test

Product Weight Net Qty:
26 gm

Container Type:
box

Directions For Use:

• The first step is to wash hands with soap and water

• Pat dry them with a towel

• An alcohol swab can be used to clean the finger before testing but ensure the fingertip is completely dry before test

• Remove the test strip from the box of strips

• Insert it into the slot on the glucometer just before pricking the finger

• Next, use a clean lancet (a device that holds the needle) or insert a clean needle in the lancet, which can help prick the fingers end

• Prick the side of the fingertip and wait till blood oozes out

• Wipe off the first drop gently, and then put a drop or two onto the designated place on a test strip attached to the glucometer

• Hold a clean cotton pad or gauze on the prick site to stop blood flow

• Apply pressure on the area of the insertion until the bleeding stops

• The blood glucose level will appear on the meter’s display

• Note down the readings as it helps monitor glucose levels from time to time

• Repeat this procedure every time to test the blood glucose level

Safety Information:

• Read the manual/instruction leaflet carefully before use

• Store in a cool and dry place, away from sunlight

• Keep out of reach of children

• Each strip is for single use only

• Dispose of the used strips properly

Compatible With:

• Gluco One BG-03 glucose meter

Faqs:
Q. Can blood sugar strips be reused?
No. All the blood glucose test strips are for single use only. Do not reuse a test strip, as it may not provide the appropriate results. It is strongly advised always to discard a test strip after every use.
Q. What are the benefits of glucometers?
It is well known that testing blood glucose levels with a glucometer at home is one of the best ways to regulate blood sugar levels. It can help to test blood glucose at any time of the day and anywhere. Using a portable glucometer is the best way to test glucose when travelling. Charting blood glucose levels becomes easy with glucometers, especially with devices with memory options to store previous readings. By helping to check blood glucose, blood glucose monitors can help manage blood glucose levels.
Q. What is a normal glucometer reading?
According to the American Diabetes Association, the fasting or preprandial blood glucose levels for diabetics should be between 80 – 130 mg/dl, and postprandial (1-2 hours after meals) should be less than 180 mg/dl. However, the range mentioned in the glucose monitor may be a little different. So, speak to the doctor to calibrate the results with the lab reports.
Q. How do blood glucose monitors work?
Diabetes devices or glucometers test the amount of glucose in the blood. The test strips in glucometers contain an enzyme glucose oxidase, which reacts with glucose in the blood and sends the result as an electronic signal displayed on the monitor.
Q. How often blood glucose levels should be tested with a glucometer?
In the case of type 1 diabetes, check the blood glucose levels several times a day, such as pre and post-meals and before and after exercise or as advised by the doctor. Whereas, in the case of type 2 diabetes, monitoring the sugar levels might be based on the severity of the condition, which can be several times a day, once a day, or thrice a week. Hence, talk to the doctor about how often blood glucose levels should be tested.