Log 9 Materials Corona Oven 2.0

irLog 9 Materials Corona Oven 2.0 has developed a proprietary device for completely neutralizing various viruses and other pathogens on surfaces of various products. This includes masks, hospital PPE & tools, groceries, electronic gadgets, etc. This includes masks, hospital tools, groceries, electronic gadgets, etc. This can kill the virus in just 4 mins on all types of surfaces. The system is specifically designed to ensure the kill of various viruses. CoronaOven is certified by ICMR empanelled CSIR CSIO Lab.

Uses:
It is used to disinfect the surface by neutralizing various viruses and bacterias.
Product Specification and Features:

• Effectively disinfects all types of surfaces contaminated with viruses, bacteria & other germs

• 360° UVC irradiation ensures 100% surface exposure

• Sanitization Time:

• 1-Home and Offices – 4 Min

• 2-Hospital setting – 8 Min

• The dimension is as follows: 55.4 x 30.6 x 43.25(cms) (LxHXB)

• Weight: 17 kg

Directions For Use:

• Do not remove the lamps from the CoronaOvenTM without reading the instructions given in the maintenance section of the user manual

• For maintenance: Dust can lower the UV output of the lamps, so the CoronaOvenTM should be cleaned from inside once a month

• While cleaning the CoronaOvenTM, use a sponge or a soft cloth

Safety Information:

• Install CoronaOvenTM in a dry place and do not operate with wet hands

• Proper electrical earthing of the CoronaOvenTM must be done and improper electrical installation can result in a risk of electrical shock

• Do not make any type of modification to the design of the CoronaOvenTM

• Avoid touching any part of the lamp, unless replacement of lamp is required

• Do not blow air from your mouth or from electrical blowers directly onto the lamps

• CoronaOvenTM should be kept out of reach of children

• Always turn off or cancel the program timer before opening the door of the CoronaOvenTM

• Do not place anything directly on top of the CoronaOvenTM and do not tamper the door lock of it

• Do not pour hot water or any other hot liquid on the surface of the CoronaOvenTM

• Avoid looking at the UV lamps directly when the CoronaOvenTM is switched on

• When the CoronaOvenTM is switched on, use UV safety spectacles with UV400 rating, if available

• Do not touch the lamps immediately after switching off the CoronaOvenTM as the lamps may reach high temperature during operation and can cause severe burns if touched

• Avoid keeping corrosive materials with the shown symbol on them inside the CoronaOvenTM

• In case of fire, unplug the CoronaOvenTM from the electrical socket and use a CO2 based fire extinguisher

• Do not use water for extinguishing electrical fires. Contact local authorities if unable to extinguish the fire