Kent Crown Plus RO Water Purifier 11L Black

Kent Crown Plus RO Water Purifier 11L Black is a water purification system that uses multi-stage purification with RO+UV+UF+TDS Control+UV In-Tank to provide purified drinking water. The UV LED light in the storage tank maintains water quality, while Zero Water Wastage Technology™ recirculates rejected water to the overhead tank. This purifier is suitable for brackish, tap, and municipal corporation water supplies, making it adaptable for various settings. It has a purification capacity of up to 20L/hr and an 11L storage tank, supporting water availability. The wall-mounted black design complements modern interiors, while its user-friendly operation allow for ease of use.

Product Dimensions:
39 cm x 28 cm x 54.5 cm (LxWxH)

Net Quantity:
1 Unit

Uses:

• Designed to purify brackish, tap water, and municipal corporation water for drinking

Product Specifications and Features:

• Multi-Stage Purification: RO+UV+UF+TDS Control+UV In-Tank, which reduces impurities, sediments, and dissolved contaminants from water

• TDS Control Valve: Allows adjustment of TDS levels to help retain essential minerals in purified water

• UV LED Light in Storage Tank: Supports water quality maintenance by helping manage contamination risks

• Water Reuse Technology: Recirculates rejected water to the overhead tank, helping to reduce water wastage

• Storage and Purification Capacity: Can purify up to 20 litres per hour with an 11L storage tank for continuous supply even in the absence of electricity

• Water Level Indicator: Allows to keep track of the amount of filtered water in the storage tank with the help of the water level indicator

• Wall-Mounted Design: Space-saving structure designed for home and office use

• ABS Plastic Build: Made from corrosion-resistant material

• Power Supply: Single Phase 100-250 V AC, 50-60 Hz

• Total Power Consumption: 60 W

Directions for Use:

• Install the purifier following the user manual instructions

Safety Information:

• Read the label carefully before use

• If the supply cord is damaged, it must be replaced using the original part to prevent hazards

• Children should be supervised to prevent improper use of the appliance

• This appliance is not intended for use by individuals with reduced physical, sensory, or mental capabilities unless supervised or instructed on its proper use

• Warning: Do not operate the UV-C emitter if it is removed from the appliance enclosure

• Read the maintenance instructions before opening the appliance

• Disconnect the appliance from power before replacing the UV-C emitter

• Avoid direct sunlight exposure and installation in damp areas

• Rejected water can be recirculated to the overhead tank to minimise wastage

• Avoid sharp bends in the pipe fittings; do not bend or block the reject water pipe

• If the purifier is not in use for more than two days, switch off the power and drain the storage tank

• Ensure that the incoming water temperature is between 10°C and 40°C

• The maximum distance between the water source and the purifier should not exceed 3 meters

• Do not place the purifier inside a closed cabinet

• Drain the storage tank once every 15 days to maintain hygiene

• Use only genuine KENT spare parts for optimal performance

• Do not attempt to service the purifier; contact an authorised technician for assistance

Replacement Policy:
In case of defective items and inner damages, replacement and/or service shall be covered under the brand warranty. In case of physical damage, wrong or missing item, Tata 1mg shall provide a replacement. This shall be valid only for 7 days from the date of delivery. Tata 1mg shall only be liable for physical damages visible from the outside, in which case customers are requested not to sign the consent form.  

Replacement verification:
During on-call support, you may be prompted to upload an image for verification. Please contact the KENT Service Centre for product-related issues. KENT will provide On-call support followed by a technician inspection at your location.

Replacement Instructions:
Keep the item in its original condition and packaging, along with the MRP tag and accessories, for a successful pick-up.

Warranty Information:
1 Year Brand Authorized service from the date of purchase and 3 years of free service. The warranty covers only manufacturing defects. Any physical damage to, plastic or glass body is not covered under the warranty. 

Brand Installation:
For On-site service, customers need to reach out to KENT service/installation no. 92789-12345 to schedule the installation visit. KENT will arrange free installation within 24-48 hours. 

Standard installation does not cover:

• Prefilter
  
  
• Pressure-reducing valve
  
  
• Inline pressure pump
  
  
• Iron remover
  
  
• Wiring extension from electricity meter to installation site, power point, MCB fitting, and any other electrical work, plumbing work, and slab cutting other than installation